Factory Standards
We test according to manufacturer standards – you prove your quality
Our laboratory specializes in performing tests on coatings in accordance with the factory standards of a wide range of manufacturers, offering you reliable and accurate testing of your products. As an accredited laboratory, we guarantee the highest quality standards and ensure that all approval tests and inspections are performed in accordance with recognized manufacturer standards and guidelines.
We test to many testing standards specifically designed to meet the requirements of the automotive, commercial vehicle, rail vehicle, construction or military industries. We understand the importance of ensuring that products meet the highest standards and meet the specific requirements of the industry.
Our main goal is to verify your quality so that you, as a supplier, can prove the quality of your products by meeting the technical delivery requirements to the Original Equipment Manufacturer (OEM). If necessary, we also assist with failure analysis and help optimize processes.
Our services include chemical resistance testing, mechanical testing, environmental testing, corrosion testing and much more. We can also help you develop test plans and evaluate test results.
Quickly search all factory standards
Do you have the name of the plant standard at hand? Quickly find the correct factory standard here by entering an abbreviation or number. Example: "DBL", "TL", "AAMA". Can't find what you're looking for? Then please feel free to contact us.
| Factory standards | Contact |
|---|---|
Qualanod |  |
GS 90010-2 | |
QIB | |
GSB QR | |
Qualicoat | |
DIN EN ISO 12944-6 | |
QIB | |
GSB QR | |
Qualicoat | |
AEP 64NATO The AEP 64 is a NATO standard which NATO contains the requirements of paint systems for the resistance against chemical agents and decontaminants. | |
M040230-00Armasuisse The quality regulations M040230-00 by the Schweizerische Eidgenossenschaft / Armasuisse contains the requirements for corrosion protection primers. | |
M040231-00Armasuisse The quality regulations M040231-00 by the Schweizerische Eidgenossenschaft / Armasuisse contains the requirements for 2C PUR camouflage paint. | |
MIL-STD-810HMIL The military standard MIL-STD-810H of the Department of Defense USA contains the environmental engineering considerations and laboratory tests for the equipment. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager  | |
TL 8010-0001Bundeswehr In the technical delivery condition TL 8010- 0001 by BAAINBw the requirements for primer coatings are specified which are applied in the industrial production/repair of Bundeswehr equipment. | |
TL 8010-0002Bundeswehr In the technical delivery condition TL 8010- 0001 by BAAINBw the requirements for topcoats are specified which are applied in the industrial production/repair of Bundeswehr equipment. | |
1E1951Caterpillar The standard 1E1951 by Caterpillar describes the requirements for high performance topcoat paints for metallic substrates. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager | |
1E1952Caterpillar The standard 1E1952 by Caterpillar describes the requirements for superior performance topcoat paints for metallic substrates. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager | |
1E2732Caterpillar The standard 1E2732 by Caterpillar describes the requirements for high performance primer paints for metallic substrates. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager | |
DBL 7391Mercedes / Daimler The company standard DBL 7391 contains the requirements for metallic parts on the outside of vehicles in commercial vehicles. Andreas
Eva M. Sc. Teamleiter Materialprüfung  Tom
Trautmann Projektingenieur | |
EVO 132.21Daimler Buses The company standard EVO 132.21 by EvoBus contains the requirements for the corrosion protection of parts based on aluminium and steel. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung  | |
LH 11007172Liebherr The Liebherr standard LH 11007172 includes the tests and requirements for coating materials used by Liebherr and their suppliers. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager | |
DBS 918300Deutsche Bahn The standard DBS 918300 describes the technical delivery conditions of liquid coatings for railway vehicles. The pages of this standard correspond to different coating systems and application areas. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin  | |
DBS 918340Deutsche Bahn The company standard DBS 918340 defines the requirements for powder coatings and powder coaters for interior or exterior parts of railway vehicles. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
DIN EN ISO 19598The standard DIN EN ISO 19598 describes electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment and which requirements apply to prof good quality of the coating. Sebastian
Windhab Stellv. Teamleitung Materialprüfung  | |
DIN EN ISO 4042The standard DIN EN ISO 4042 describes electroplated coating systems especially for fasteners and defines criteria for a good quality of the coating. Sebastian
Windhab Stellv. Teamleitung Materialprüfung | |
PTL 5536Porsche Porsche's PTL 5536 describes the requirements for surface decorations inside the vehicle with paint, printing, foil or another thin-film system. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
PTL 5538Porsche The PTL 5538 from Porsche describes the requirements for Surface decorations inside the vehicle made of wood, carbon or metal. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
PTL 5580Porsche The PTL 5580 from Porsche specifies the requirements for paint coatings on exterior and compound plastic parts. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
PTL 7524Porsche The PTL 7524 from Porsche contains the requirements for the surface protection by anodized aluminium. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
TL 182Volkswagen The company standard TL 182 defines requirements for anodic oxide layers and nonmetallic top coats on components of aluminum and aluminum alloys that can be anodized. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
TL 211Volkswagen The company standard TL 211 from Volkswagen defines the requirements for polymer coatings of vehicle exterior parts made of plastic. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
TL 212Volkswagen This company standard specifies the requirements for the oxide layer on aluminium parts. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
TL 217Volkswagen The company standard TL 217 describes the requirements of zinc coatings for batch- galvanized components. Sebastian
Windhab Stellv. Teamleitung Materialprüfung | |
TL 226Volkswagen The company standard TL 226 from Volkswagen defines the requirements for the paintwork on materials of vehicle interior equipment. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
TL 227Volkswagen The company standard TL 227 from Volkswagen describes the requirements for single-layer paint coating on zinc-coated metal surfaces. Sebastian
Windhab Stellv. Teamleitung Materialprüfung Tom
Trautmann Projektingenieur | |
TL 244Volkswagen The company standard TL 244 specifies the requirements for zinc/nickel alloy coatings on ferrous materials and steel parts. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
TL 256Volkswagen The company standard TL 256 from Volkswagen describes the surface protection requirements for powder coatings on metal surfaces. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
TL 260Volkswagen The company standard TL 260 describes the requirements for the corrosion protection of black paintwork on metal surfaces. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
TL 52451Volkswagen The company standard TL 52451 from Volkswagen defines the requirements for the paintwork of decorative metallic add-on parts on the exterior. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
AAMA 2603AAMA The AAMA specification 2603 describes the AAMA requirements for pigmented organic coatings applied to aluminium parts for architectural products. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
AAMA 2604AAMA The AAMA specification 2604 describes the AAMA requirements for high performance organic coatings applied to aluminium parts for architectural products. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
AAMA 2605AAMA The AAMA specification 2605 describes the AAMA requirements for superior performing organic coatings applied to aluminium parts for architectural products. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
AAMA 611AAMA This AAMA specification 611 describes the requirements for quality aluminium oxide coatings applied to aluminium parts for architectural products. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
DIN 55633The standard series DIN 55633 is an addition to the international well-known series ISO 12944 for corrosion protection systems in the form of liquid paint systems on thick-walled building components made of steel. Instead of liquid paints, the DIN standard considers powder coating systems. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
DIN 55634The standard series DIN 55634 describes the requirements for the corrosion protection properties of powder coating systems on steel. Compared to the standard DIN 55633, it covers thin-walled building components made of steel. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
DIN EN ISO 12944The international norm series ISO 12944 defines the requirements of the corrosion protection for liquid paint systems on thick- walled steel and galvanized steel. Depending on the desired durability of the coating, the ISO 12944-6 specifies a test program including the corresponding requirements. Philip
Malchow M. Sc. Teamleiter Korrosionsprüfung Jeannine
Sahin Dipl.-Ing. Projektingenieurin | |
DBL 7381Mercedes / Daimler The company standard DBL 7381 describes Mercedes/Daimler the requirements for organic coatings for metallic parts on the outer side and underside of the vehicle and in the engine compartment. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
DBL 7382Mercedes / Daimler The company standard DBL 7382 describes the supply specification for coatings/paintings of metallic parts within the vehicle interior. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
DBL 7384Mercedes / Daimler The company standard DBL 7384 from Mercedes-Benz describes the requirements for coatings on plastic parts within the vehicle interiors. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
DBL 7390Mercedes / Daimler The DBL 7390 describes the requirements for primed metallic components as basis for the following finish coats. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
DBL 8440Mercedes / Daimler The DBL 8440 describes the requirements for parts manufactured from ferrous materials with inorganic coatings (zinc flake coatings). Sebastian
Windhab Stellv. Teamleitung Materialprüfung | |
DBL 8451Mercedes / Daimler The company standard DBL 8451 describes the requirements for electrodeposited zinc and zinc alloy coatings for components manufactured from ferrous materials. Sebastian
Windhab Stellv. Teamleitung Materialprüfung | |
DBL 9201Mercedes / Daimler The DBL 9201 contains the requirements for aluminum parts with anodic oxide layers. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
DBL 9440Mercedes / Daimler The company standard DBL 9440 describes the requirements for the surface protection and technical delivery conditions for fasteners with a metric thread. Sebastian
Windhab Stellv. Teamleitung Materialprüfung | |
DBL 9441Mercedes / Daimler The company standard DBL 9441 defines the requirements for the surface protection of fasteners for direct screw connection in sheet metal and plastic. Sebastian
Windhab Stellv. Teamleitung Materialprüfung | |
MBN 10494-5Mercedes / Daimler The company standard MBN 10494-5 contains several technical and mechanical tests for paint coated parts and test panels. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
MBN 10494-6Mercedes / Daimler The company standard MBN 10494-5 contains several climatic tests for paint coated parts and test panels. Andreas
Eva M. Sc. Teamleiter Materialprüfung Tom
Trautmann Projektingenieur | |
PN 11011Porsche The company standard PN 11011 by Porsche is an overview of surface protections of metal parts. It refers to other standards for different coating systems and application areas like the PTL 5536, PTL 5538, PTL 5580, PTL 7524 or PTL 8140. Jörg
Bihlmaier Dipl.-Ing. (FH) Key Account Manager Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
GS 90010-1BMW The company standard GS 90010-1 from BMW describes the different surface protection types for metallic and anorganic coatings on metal parts and defines their requirements. Sebastian
Windhab Stellv. Teamleitung Materialprüfung Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
GS 90011BMW The company standard GS 90011 from BMW contains the test methods and requirements for organic coatings on metal parts. Sebastian
Windhab Stellv. Teamleitung Materialprüfung Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
GS 94007BMW The company standard GS 94007 from BMW contains the test methods and requirements for organic coatings on plastic parts. Sebastian
Windhab Stellv. Teamleitung Materialprüfung Andreas
Eva M. Sc. Teamleiter Materialprüfung | |
Automotive
Compliance with manufacturer norms and standards in the automotive sector is critical to ensure vehicle safety and reliability. We provide automotive suppliers with material testing, part testing, and component testing in accordance with many automotive and vehicle manufacturer standards, such as BMW, Mercedes Benz, Porsche, and VW.
Commercial Vehicles
We provide comprehensive testing according to the performance standards of many commercial vehicle manufacturers. In the commercial vehicle sector, the coating is expected to deliver top performance in terms of quality and durability. We assist you in ensuring that your product meets these requirements. Among others, we conduct tests based on the factory standards for Caterpillar, Daimler Truck, and Liebherr.
Proceed to factory standards for Commercial Vehicles
Rail Vehicles
Our laboratory is specialized in conducting extensive tests according to rail vehicle standards. Our focus is on the safety and reliability of your products so that the high standards for rail vehicles are met and the required quality is ensured. Among other things, we test according to the technical delivery conditions of Deutsche Bahn.
Construction Industry
As an experienced provider of testing services for architecture and the construction industry, we understand the importance of compliance with standards for the construction industry. We test in the construction industry according to internationally recognized standards such as AAMA (American Architectural Manufacturers Association), DIN 55633 and DIN EN ISO 12944.
Proceed to factory standards for Construction Industry
Military
Quality and reliability are paramount in meeting the stringent requirements of military standards. We test according to the standards of NATO, the Swiss Confederation (Armasuisse), the U.S. Department of Defense (MIL) and the technical delivery conditions of the German Armed Forces (BAAINBw).
Proceed to factory standards for Military
Fastening Elements
Fastening elements are used to connect individual components into a technical system, such as an assembly or a complete machine, and therefore must exhibit high quality and performance. We verify compliance with the internationally recognized standards DIN EN ISO 19598 and DIN EN ISO 4042.
Proceed to factory standards for Fastening Elements
